Pressure Washer Accessories
Washguns And Lances
Washguns And Lances
The right washgun and lance combination makes a big difference to comfort, reach and cleaning performance. We stock a wide range of lances in multiple lengths, ideal if you need an alternative size to make cleaning more comfortable, reduce fatigue, or improve access around vehicles, yards, and equipment.
For higher or awkward areas, such as ceilings, roofs, cladding and elevated machinery, we also supply longer lances and extending lances to help you work more safely and effectively without overreaching. If you’re unsure which option best suits your machine or application, contact us, and we’ll help you choose the correct setup.
- Pressure 140 Bar
- 80 C
Pressure Washer Nozzles for Industrial & Commercial Cleaning
Low and High pressure nozzles in angles from 0 to 40 degrees. Please state angle and size required (use table above to work out size). These nozzles all have 1/4 male thread, we also supply 1/4F sockets if required.
This unit is an alternative to a double lance. By twisting knurled shroud, pressure can be reduced whilst maintaining the volume thus enabling detergent to be administered through an injection facility. Requires a nozzle of the correct size (see above).
Max. bar 250, max. vol 30 ltr/min, max temp 150C, Ports 2 x 1/4F 241.ADJNOZ
This unit is a simply engineered device for alternating nozzle widths/sizes etc. without the use of spanners. It accepts two different high pressure nozzles e.g. pencil jet and wide angle jet, which can be used alternatively by turning the lance over to set jet whilst trigger is not squeezed. Max bar 200, max vol 40 ltr/min, max temp 90C, 1/4F inlet, 2 x 1/4M outlets. 23001500
Rotating action gives enhanced cleaning capability. Pressure and volume of machine are required to determine nozzle size.
Max temp 100C, Max bar 210.
(350 bar)
